Loading...
Оказываем услуги вибрационной стабилизации остаточных напряжений мобильным оборудованием с компьютерной диагностикой и документированием процесса.

The comb meter GU-1 and GU-2

The comb meter GU-1 and GU-2 0

The comb meter GU-1 according to TU U 33.2-23113534-001: 2006 is designed to measure and control the geometric parameters of the rolling surface of tire wheel bands: the thickness of the ridge, the height of the ridge, the rolling value, the steepness parameter of the ridge gR (identifying the dangerous shape of the ridge).


Compressor GU-1 in its design characteristics replaces all the earlier applied templates in the Russian Ministry of Railways (including absolute templates) for any operated railroad wheel profiles, as well as European profiles. Nonius system of scales allows to carry out the control of deterioration of wheel pairs on the European standards. The presence of a hard-alloy tip and hardened contacting surfaces, as well as the use of hardened stainless steels, provide an almost unlimited resource of these devices.
The construction and method for controlling the wear of the railroad wheel of the comb-measuring device are protected by patents.


Technical specifications


Measurement range:
thickness of the ridge (scale 1), mm15…36
height of the ridge (scale 2), mm24…40
rolling stock, (scale 2), mm0…10
slope parameter (scale 3), mm3…15
Price of scale division, mm1
Value of counting by vernier, mm0,1
Limit of permissible absolute error of measurements, mm±0,1
Distance between base supports, mm

70 ±0,1
Measurement base, mm13 ±0,1
Overall dimensions, mm23,5 х 128 х 138,5
Weight without case and installation measures, kg0,52
Weight of installation measure, kg0,56





The comb meter GU-2 is designed to measure and control the geometric parameters of the rolling surface of tire wheel sets: the thickness of the ridge, the height of the ridge, the value of the rolling, the steepness of the crest (the definition of the dangerous shape of the ridge), the thickness of the bandage.






Technical specifications


Measurement range:
thickness of the ridge, mm15…36
ridge height, mm24…40
rolling stock, mm

0…10
the steepness of the crest, mm3…15
thickness of the bandage, mm30…90
Price of scale division, mm

1

Value of counting by vernier, mm

0,1
Limit of permissible absolute error of measurements, mm±0,1
Distance between base supports, mm70 ±0,05
Distance from the support along the circle of rolling to the surface of the measuring leg, mm13 +0,020/-0,025
Effort to move the frames, H10
Overall dimensions, mm23,5 х 145 х 208
Weight without case and installation measures, kg1,2
Weight of installation measure, kg0,55


The construction and method for controlling the wear of the railroad wheel of the comb-measuring device are protected by patents.