Press for bricks "Lego"
Our company has mastered the production of manual, hydraulic and electromechanical presses for the production of "Lego" bricks.
It is possible to develop and produce automated lines and workshops for the production of "Lego" brick with any performance, as per the technical task of the customer.
Machine PSR-1 for the production of compressed bricks with manual drive, per brick.
Dimensions: 160 x 50 x 110 cm
Weight: 90 kg
Bunker capacity: 45 liters
Capacity: 120 pcs / hour, 960 pcs / shift (2.5 m3)
Number of workers: 1-3 people.
Pressure on the product: 2 tons
Dimensions of the product: 250 x 125 x 65 mm - single brick (Lego)
PSG-1 machine for production of dry pressed brick with hydraulic drive, per brick
The machine is designed for the production of dry pressed bricks by the method of dry hyperpressing.
For pressing bricks in the machine tool hydraulic drive is applied.
The hydraulic drive system consists of: engine, hydraulic pump, hydraulic cylinder, control, (mode switch), hydraulic lines and oil tank, (hydraulic accumulator for oil).
The hydraulic drive system pressurizes the working body, (pusher), force ~ 8-10 tons.
Electric motor: asynchronous, with short-circuited rotor, power 4-5.5 kW, 1500 rpm, AIRM112M4 / 2 or other similar type.
Hydraulic pump: Pump gears NSH10B-3, NSH10V-3, NSH10G-3, NSh10E-3, NSh10U-3, NSh10-4, (right rotation) and pumps NSh10B-3L, NSh10V-3L, NSh10G-3L, NSh10E-3L, НШ10У-3Л, НШ10-4Л (left rotation),
with a working volume of 10 cm³, with a nominal outlet pressure of 20 MPa
The pump can be of any type, providing an outlet pressure of ~ 20 MPa.
Hydraulic cylinder: double-acting hydraulic cylinder, piston diameter 80 mm, stem diameter 40 mm, such a cylinder at a pump pressure of 20 MPa, will provide a force on the pusher of the machine ~ 10 tons.
The frame of the machine is a welded construction, welded from the channel No. 12. It is reinforced at the base by the channel No. 12.
The matrices are made of steel St45, the surfaces are ground: Ra = 0.6
PSG-2 machine for production of dry pressed brick with hydraulic drive, two bricks
Dimensions: 150 x 65 x 120 cm
Weight: 200 kg
Engine AIR: 3 phase, 380V, 4 kW
Hydraulic oil, in tank, volume: 12 l
Bunker capacity: 45 liters
Productivity: 180 pcs / hour, 1440 pcs / shift (3.8 m3)
Number of workers: 1-3 people.
Pressure on the product: 8-10 tons (adjustable)
Dimensions of the product: 250 x 125 x 65 mm - dimensions of a single brick (Lego Series)